Social media for home services businesses, written and ready to post

One trade at a time, in the words your customers use.

Join the waitlist See pricing

You approve every post. Nothing publishes automatically.

Built to help you:

Grow your audience
Outcompete everyone
Sell more

InstagramXFacebookLinkedIn

Example plumbing company

Sample

Slide 1 of 8

Slide 2 of 8

Slide 3 of 8

Slide 4 of 8

Slide 5 of 8

Slide 6 of 8

Slide 7 of 8

Slide 8 of 8

CommentShareSave

Example plumbing company A colder month's water usage can hint at serious leaks.

moreless

The EPA suggests looking at a colder month, like January or February. If a family of four uses more than 12,000 gallons that month, there could be serious leaks.

Showers count too. The EPA says a showerhead leaking at 10 drips per minute wastes more than 500 gallons a year.

Save this for the next time your bill looks high. When did you last check your toilet flapper?

#leakdetection #fixaleak #watersense

Example plumbing company · Sample1/3
The average household's leaks can waste more than 9,300 gallons of water a year, the EPA says. And nine percent of homes have leaks wasting 50 gallons or more a day.
ReplyRepostShare

Show this threadHide this thread

Example plumbing company · Sample2/3
The one you can hear adds up too. A faucet dripping at one drip per second can waste more than 3,000 gallons a year, the EPA says. That is enough water for more than 180 showers.
ReplyRepostShare
Example plumbing company · Sample3/3
Check it yourself. Read your water meter, use no water for two hours, and if it changes at all you probably have a leak. Or put a few drops of food coloring in the toilet tank: color in the bowl after 10 minutes means a leak. #fixaleak.
ReplyRepostShare

Example plumbing company

Sample · not published

Nine percent of homes have leaks wasting 50 gallons or more daily.

…see moresee less

A colder month's water usage can hint at serious leaks.

The EPA suggests looking at a colder month, like January or February. If a family of four uses more than 12,000 gallons that month, there could be serious leaks.

Showers count too. The EPA says a showerhead leaking at 10 drips per minute wastes more than 500 gallons a year.

When did you last run a meter test on the homes or properties you look after?

CommentShare

Example plumbing company

Sample · not published

Nine percent of homes have leaks wasting 50 gallons or more daily.

…see moresee less

The EPA says the average household's leaks can waste more than 9,300 gallons of water a year.

The common culprits are small: worn toilet flappers, dripping faucets and other leaking valves.

A toilet flapper is the simple rubber device that holds water in the tank, and the rubber can wear out. The EPA says it should be checked periodically and replaced at least every five years, because an old or worn one can silently leak thousands of gallons a year.

A faucet dripping once per second can waste more than 3,000 gallons a year.

For anyone running a home or looking after a building, the numbers add up. The EPA puts the average family's water costs at more than $1,000 a year.

It also says fixing easily corrected leaks can save homeowners about 10 percent on their water bills.

Start with the water meter. Read it before and after two hours with no water in use; if it changes at all, you probably have a leak.

Then put a few drops of food coloring in a toilet tank. Color in the bowl after 10 minutes means a leak.

When did you last run a meter test on the homes or properties you look after?

CommentRepostSend

An example post for plumbing businesses. We write for any local business.

Join the waitlist See pricing

From your business to finished posts.

You receive finished work, not software to operate.

We learn your business
Who you serve, how you sound, what you cannot say.
We find what is worth saying
Questions your audience will recognise this week.
We write and check it
Words per channel, pictures beside them, claims verified.
You approve and post
Approve it, ask for a repair, or pick another.

Another post we wrote for home services businesses.

The install behind your HVAC. Installation quality, and the percentages it moves.

The facts in it come from Heat & Cool Efficiently | ENERGY STAR and Maintenance Checklist | ENERGY STAR.

Join the waitlist

InstagramXFacebookLinkedIn

Example heating and cooling company

Sample

Slide 1 of 7

Slide 2 of 7

Slide 3 of 7

Slide 4 of 7

Slide 5 of 7

Slide 6 of 7

Slide 7 of 7

CommentShareSave

Example heating and cooling company To get the best performance from new HVAC equipment, it must be properly installed.

moreless

Nearly half of the energy used in your home goes to heating and cooling.

ENERGY STAR says improper installation can reduce system efficiency by up to 30%, costing you more on utility bills and possibly shortening the equipment's life.

One more thing before you buy: ENERGY STAR suggests addressing the big air leaks in your house and the duct system first. Sometimes those are the real sources of problems rather than the equipment.

Save this for the day you start collecting quotes on a new system. What is one question you would ask an installer before signing?

#HVACinstallation #energystar

Example heating and cooling company · Sample1/3
Improper installation can reduce an HVAC system's efficiency by up to 30 percent, according to ENERGY STAR. That costs you more on your utility bills and may shorten the equipment's life.
ReplyRepostShare

Show this threadHide this thread

Example heating and cooling company · Sample2/3
Nearly half of the energy used in your home goes to heating and cooling. Depending on where you live, replacing old equipment with ENERGY STAR certified equipment can cut your annual energy bill by nearly $140.
ReplyRepostShare
Example heating and cooling company · Sample3/3
The details keep mattering after day one. Airflow problems can reduce a system's efficiency by up to 15 percent. Too much or too little refrigerant makes a system less efficient.
ReplyRepostShare

Example heating and cooling company

Sample · not published

Before you sign an HVAC quote, ask how it will be installed.

…see moresee less

To get the best performance from new HVAC equipment, it must be properly installed.

Nearly half of the energy used in your home goes to heating and cooling.

ENERGY STAR says improper installation can reduce system efficiency by up to 30%, costing you more on utility bills and possibly shortening the equipment's life.

What do you ask a contractor about installation before you sign?

CommentShare

Example heating and cooling company

Sample · not published

Before you sign an HVAC quote, ask how it will be installed.

…see moresee less

Nearly half of the energy used in a home goes to heating and cooling, according to ENERGY STAR. So decisions about that system can have a big effect on your utility bills.

Replacing old equipment with ENERGY STAR certified models can cut an annual energy bill by nearly $140, depending on where you live.

ENERGY STAR also warns that improper installation can reduce system efficiency by up to 30 percent, costing more on utility bills and possibly shortening the equipment's life.

The details keep mattering after day one. Airflow problems can reduce a system's efficiency by up to 15 percent.

Too much or too little refrigerant will make a system less efficient, increasing energy costs and reducing the life of the equipment.

ENERGY STAR's advice is to ask about proper installation of new equipment. It also says a yearly tune-up of your heating and cooling system can improve efficiency and comfort.

What do you ask a contractor about installation before you sign?

CommentRepostSend

An example post for heating and cooling businesses. We write for any local business.

What arrives, every week.

We read your own pages and write from them.
Finished posts for each channel, with their pictures.
Every claim quoted from a page you can open.
You approve. Nothing publishes on its own.

Questions

Do you publish for me?

No. We prepare the posts and you approve them. Nothing publishes automatically.

Do you understand home services businesses?

We learn your business from your own pages, and a post says about you only what they support. Its other facts come from public sources it names, which you can open.

What do I actually receive?

Finished posts for each channel, with their pictures, ready for you to approve and post.

What does it cost?

Three monthly plans, from $99 a month. See the plans