Social media for heating and cooling businesses, written and ready to post

Be the name they already know when the season turns.

Join the waitlist See pricing

You approve every post. Nothing publishes automatically.

Built to help you:

Grow your audience
Outcompete everyone
Sell more

InstagramXFacebookLinkedIn

Example heating and cooling company

Sample

Slide 1 of 7

Slide 2 of 7

Slide 3 of 7

Slide 4 of 7

Slide 5 of 7

Slide 6 of 7

Slide 7 of 7

CommentShareSave

Example heating and cooling company To get the best performance from new HVAC equipment, it must be properly installed.

moreless

Nearly half of the energy used in your home goes to heating and cooling.

ENERGY STAR says improper installation can reduce system efficiency by up to 30%, costing you more on utility bills and possibly shortening the equipment's life.

One more thing before you buy: ENERGY STAR suggests addressing the big air leaks in your house and the duct system first. Sometimes those are the real sources of problems rather than the equipment.

Save this for the day you start collecting quotes on a new system. What is one question you would ask an installer before signing?

#HVACinstallation #energystar

Example heating and cooling company · Sample1/3
Improper installation can reduce an HVAC system's efficiency by up to 30 percent, according to ENERGY STAR. That costs you more on your utility bills and may shorten the equipment's life.
ReplyRepostShare

Show this threadHide this thread

Example heating and cooling company · Sample2/3
Nearly half of the energy used in your home goes to heating and cooling. Depending on where you live, replacing old equipment with ENERGY STAR certified equipment can cut your annual energy bill by nearly $140.
ReplyRepostShare
Example heating and cooling company · Sample3/3
The details keep mattering after day one. Airflow problems can reduce a system's efficiency by up to 15 percent. Too much or too little refrigerant makes a system less efficient.
ReplyRepostShare

Example heating and cooling company

Sample · not published

Before you sign an HVAC quote, ask how it will be installed.

…see moresee less

To get the best performance from new HVAC equipment, it must be properly installed.

Nearly half of the energy used in your home goes to heating and cooling.

ENERGY STAR says improper installation can reduce system efficiency by up to 30%, costing you more on utility bills and possibly shortening the equipment's life.

What do you ask a contractor about installation before you sign?

CommentShare

Example heating and cooling company

Sample · not published

Before you sign an HVAC quote, ask how it will be installed.

…see moresee less

Nearly half of the energy used in a home goes to heating and cooling, according to ENERGY STAR. So decisions about that system can have a big effect on your utility bills.

Replacing old equipment with ENERGY STAR certified models can cut an annual energy bill by nearly $140, depending on where you live.

ENERGY STAR also warns that improper installation can reduce system efficiency by up to 30 percent, costing more on utility bills and possibly shortening the equipment's life.

The details keep mattering after day one. Airflow problems can reduce a system's efficiency by up to 15 percent.

Too much or too little refrigerant will make a system less efficient, increasing energy costs and reducing the life of the equipment.

ENERGY STAR's advice is to ask about proper installation of new equipment. It also says a yearly tune-up of your heating and cooling system can improve efficiency and comfort.

What do you ask a contractor about installation before you sign?

CommentRepostSend

An example post for heating and cooling businesses. We write for any local business.

Join the waitlist See pricing

From your business to finished posts.

You receive finished work, not software to operate.

We learn your business
Who you serve, how you sound, what you cannot say.
We find what is worth saying
Questions your audience will recognise this week.
We write and check it
Words per channel, pictures beside them, claims verified.
You approve and post
Approve it, ask for a repair, or pick another.

Another post we wrote for heating and cooling businesses.

The safety list in your check-up. What a seasonal furnace check-up covers, and why each item is safety.

The facts in it come from Heat & Cool Efficiently | ENERGY STAR and Maintenance Checklist | ENERGY STAR.

Join the waitlist

InstagramXFacebookLinkedIn

Example heating and cooling company

Sample

Slide 1 of 8

Slide 2 of 8

Slide 3 of 8

Slide 4 of 8

Slide 5 of 8

Slide 6 of 8

Slide 7 of 8

Slide 8 of 8

CommentShareSave

Example heating and cooling company Faulty electrical connections can cause unsafe operation. A check-up should tighten them.

moreless

ENERGY STAR's maintenance list also covers gas connections, gas pressure, burner combustion and the heat exchanger. Improperly operating gas connections are a fire hazard.

Another item worth knowing: the condensate drain in your furnace or central AC. A plugged drain can cause water damage in the house and affect indoor humidity levels.

ENERGY STAR says fall is the time to check the heating system, since contractors get busy once winter comes.

When did your furnace last have its gas side checked?

#furnace #hvacmaintenance

Example heating and cooling company · Sample1/3
A cracked heat exchanger can make a furnace run less safely. ENERGY STAR lists it on a typical check-up, along with gas connections, gas pressure and burner combustion.
ReplyRepostShare

Show this threadHide this thread

Example heating and cooling company · Sample2/3
Per ENERGY STAR, improperly operating gas connections are a fire hazard and can contribute to health problems. Faulty electrical connections can cause unsafe operation too.
ReplyRepostShare
Example heating and cooling company · Sample3/3
Timing tip: check the heating system in the fall, since contractors get busy once winter comes. Between visits, change the filter at least every 3 months. #furnace.
ReplyRepostShare

Example heating and cooling company

Sample · not published

Warm is not the same as checked.

…see moresee less

Faulty electrical connections can cause unsafe operation. A check-up should tighten them.

ENERGY STAR's maintenance list also covers gas connections, gas pressure, burner combustion and the heat exchanger. Improperly operating gas connections are a fire hazard.

Another item worth knowing: the condensate drain in your furnace or central AC. A plugged drain can cause water damage in the house and affect indoor humidity levels.

When did your heating system last get a full safety check?

CommentShare

Example heating and cooling company

Sample · not published

Warm is not the same as checked.

…see moresee less

ENERGY STAR publishes what a typical maintenance check-up should include, including a check of the controls for proper and safe operation.

On the gas side: connections, gas pressure, burner combustion and the heat exchanger. Improperly operating gas connections are a fire hazard and can contribute to health problems.

A dirty burner or cracked heat exchanger causes improper burner operation, which can make the equipment run less safely and efficiently.

On the electrical side: tighten connections and measure voltage and current on motors. Faulty connections can cause unsafe operation and shorten the life of major components.

Then the controls: the system should start, operate and shut off properly.

The efficiency stakes ride along. Nearly half of a home's energy goes to heating and cooling.

And airflow problems can reduce a system's efficiency by up to 15 percent.

ENERGY STAR recommends checking the heating system in the fall, because contractors get busy once winter comes.

When did your heating system last get a full safety check?

CommentRepostSend

An example post for heating and cooling businesses. We write for any local business.

What arrives, every week.

We read your own pages and write from them.
Finished posts for each channel, with their pictures.
Every claim quoted from a page you can open.
You approve. Nothing publishes on its own.

Questions

Do you publish for me?

No. We prepare the posts and you approve them. Nothing publishes automatically.

Do you understand heating and cooling businesses?

We learn your business from your own pages, and a post says about you only what they support. Its other facts come from public sources it names, which you can open.

What do I actually receive?

Finished posts for each channel, with their pictures, ready for you to approve and post.

What does it cost?

Three monthly plans, from $99 a month. See the plans